Possibly putting RO90 in the reset line under setup may work. The manufacturer’s attention to an airtight condition when he caps are on is excellent. Material – Use Cast Vinyl not calendered, its more expensive but is thinner and holds detail better. See that container of Koh-I-Noor Black. The three items in the case are Mutoh mechanical pencils, a 3mm, 5mm and 7mm pencil. Speed – slow, though on intricate designs the cutters rarely manage to accelerate anyway.
|Date Added:||24 December 2011|
|File Size:||50.85 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Mutoh XP-620C Setup Help
If you are unsure if your cable is a RS C cable, contact your plotter distributor. Temperature, hot vinyl moves on the backing sheet causing problems, if your workshop is warm try this jutoh trick, place the vinyl in a fridge to cool down then cut it Check the step size used by the cutter, mutohs have variable step sizes if you are not using 0.
Speed – slow, though on intricate designs the cutters rarely manage to accelerate anyway.
For more information click here. The air in the containers and bags is vacuumed out reducing the likelihood of further dry-outs.
As soon as I try to start the plot the Mjtoh picks up the knive goes across the sheet, puts the knive down and cuts a line a cross the sheet from upper left corner to the bottom right corner and I get an error message saying “Out of Limit” from the plotter.
The manufacturer’s attention to an airtight condition when he caps are on is excellent. Hi Alan, thanx for the quick response.
See that container of Koh-I-Noor Black. I don’t know the shelf life of the Trans.
Large Format Printers & Cutting Plotters
This is what it looks like for this machine. Choose the Enter button. Below is a link to a Japanese brochure for the Mutoh line. Reply 3 – Do I need a knive with a lower degree value for example 30 degrees or is the knive maybe just not sharp mtuoh anymore I just bought the plotter with a used knive?
Mutoh XPC Setup Help | Signscom: Largest Forum for Signmaking Professionals
Eight re-useable pen holders loaded with ink and 0. The Black Cat India may also have a long shelf life.
Mutoh no longer supports these. Follow the instructions on 4 and 5 of the SignTools 4 User Guide. My preferance is to remove the set speed command for my cutters so the speed I set on the control panel is the one the cutter goes at sorry signgo writers but this is one command to far I just don’t get it anymore Aug at Next the caps come off, the type A adaptors are screwed on, and the pens are inserted into the carousel.
SignTools will not communicate with your plotter with a different cable. Click on the word Document on the left hand side and ensure all of the options are ticked and click on the OK button.
The port on the back of the plotter is a 25 pin RS The three items in the case are Mutoh mechanical pencils, a 3mm, 5mm and 7mm pencil. This sets the menu to Standby. The XP is a pen muton pencil vector plotter. Reply 5 – Reply 7 – I am thankfull for any advise. To further aid in the pens longevity the FoodSaver canister or FoodSaver vacuum bags are used. A detail blade shallow angle helps, Sharp blade, inspect the mutlh with a magnifing glass to see if the points broken.
I’m having some success and I’m still exploring for good combinations.
The 25 pin to 9 pin can’t fit due to the close arrangement of the monitor connection, so I use a 9 pin to 9 pin cord.